Supporting Technical Assessments

www.valenza-engineering.com 381_R_04_Rev 0 OGNZL_WUG_Phase1_Conceptual_Mitigation DISCLAIMER This document has been produced for New Zealand consenting purposes only. Information contained herein must not be relied on for investment purposes. Scope of Services: Valenza Engineering has prepared this report in accordance with the scope of services set out in the contract, or as otherwise agreed, between the client and Valenza Engineering. Reliance on Data: In preparing the comments and edits to this report, Valenza Engineering has relied upon data, surveys, analyses, designs, plans, and other information provided by the client and other individuals and organisations, most of which are referred to in the report (the data). Except as otherwise stated, Valenza Engineering has not verified the accuracy or completeness of the data. To the extent that the statements, opinions, facts, information, conclusions, and/or recommendations in the report (conclusions) are based in whole or part on the data, those conclusions are contingent upon the accuracy and completeness of the data. Valenza Engineering will not be liable in relation to incorrect conclusions should any data, information, or condition be incorrect or have been concealed, withheld, misrepresented, or otherwise not fully disclosed to Valenza Engineering. Interpretations and Conclusions: In accordance with the scope of services, Valenza Engineering has relied upon the data provided in the preparation of comments and edits to the report. The nature and extent of monitoring and/or testing conducted and reviewed are described in this report. On all sites, varying degrees of non-uniformity of the vertical and horizontal soil, rock, and/or groundwater conditions are encountered. Hence no monitoring can eliminate the possibility that the data obtained are not representative of ground and/or groundwater conditions encountered. The interpretations and conclusions in the edits to this report are based upon the available data and are therefore merely indicative of the conditions from the available data at the time of preparing the report. Also, it should be recognised that the data reviewed are from a limited period and that site conditions can change with time. Within the limitations imposed by the scope of services, the analysis performed and the edits to the report have been undertaken and performed professionally, following generally accepted practices and using a degree of skill and care ordinarily exercised by reputable hydrogeological consultants under similar circumstances. No other warranty, expressed or implied, is made. Report for Benefit of Client Only: The edits to this report have been prepared for the benefit of the client, Valenza Engineering, and no other party. Valenza Engineering assumes no responsibility and will not be liable to any other person or organisation for or in relation to any matter dealt with or conclusions expressed in the report, or for any loss or damage suffered by any other person or organisation arising from matters dealt with or conclusions expressed in the report (including without limitation matters arising from any negligent act or omission of Valenza Engineering or for any loss or damage suffered by any other party relying upon the matters dealt with or conclusions expressed in the report). Parties other than the client and Valenza Engineering should not rely upon the report edits or the accuracy or completeness of any conclusions and should make their enquiries and obtain independent advice in relation to such matters. The Valenza Engineering report was prepared according to the scope of services set out in the contract, or as otherwise agreed, between the client and Valenza Engineering (scope of services).

RkJQdWJsaXNoZXIy MjE2NDg3