INPUT GROUP: 3 -- Output Options Parameter Description Value Test/debug option: print final wind speed and direction? (0 = no, 1 = yes) 0 IPR3 Test/debug option: print final divergence fields? (0 = no, 1 = yes) 0 IPR4 Test/debug option: print winds after kinematic effects? (0 = no, 1 = yes) 0 IPR5 Test/debug option: print winds after Froude number adjustment? (0 = no, 1 = yes) 0 IPR6 Test/debug option: print winds after slope flow? (0 = no, 1 = yes) 0 IPR7 Test/debug option: print final winds? (0 = no, 1 = yes) 0 IPR8 INPUT GROUP: 4 -- Meteorological Data Options Parameter Description Value Observation mode (0 = stations only, 1 = surface/overwater stations with prognostic upper air, 2 = prognostic data only) 2 NOOBS Number of surface stations 0 NSSTA Number of precipitation stations -1 NPSTA Output the CLOUD.DAT file? (0 = no, 1 = yes) 0 ICLDOUT Method to compute cloud fields (1 = from surface obs, 2 = from CLOUD.DAT, 3 = from prognostic (Teixera), 4 = from prognostic (MM5toGrads) 4 MCLOUD Surface met data file format (1 = unformatted, 2 = formatted) 2 IFORMS Precipitation data file format (1 = unformatted, 2 = formatted) 2 IFORMP Cloud data file format (1 = unformatted, 2 = formatted) 1 IFORMC INPUT GROUP: 5 -- Wind Field Options and Parameters Parameter Description Value Wind field model option (1 = objective analysis, 2 = diagnostic) 1 IWFCOD Adjust winds using Froude number effects? (0 = no, 1 = yes) 1 IFRADJ Adjust winds using kinematic effects? (0 = no, 1 = yes) 0 IKINE Adjust winds using O'Brien velocity procedure? (0 = no, 1 = yes) 0 IOBR Compute slope flow effects? (0 = no, 1 = yes) 1 ISLOPE Extrapolation of surface winds to upper layers method (1 = none, 2 = power law, 3 = user input, 4 = similarity theory, - = same except layer 1 data at upper air stations are ignored) 1 IEXTRP Extrapolate surface winds even if calm? (0 = no, 1 = yes) 0 ICALM Weighting factors for surface and upper air stations (NZ values) 0.0,0.0,0.0,0.0,0.0,0.0 ,0.0,0.0,0.0,0.0 BIAS Minimum upper air station radius of influence for surface extrapolation exclusion (km) 4 RMIN2 Use prognostic winds as input to diagnostic wind model (0 = no, 13 = use winds from 3D.DAT as Step 1 field, 14 = use winds from 3D.DAT as initial guess field, 15 = use winds from 3D.DAT file as observations) 14 IPROG Prognostic data time step (seconds) 3600 ISTEPPGS Use coarse CALMET fields as initial guess? (0 = no, 1 = yes) 0 IGFMET Use varying radius of influence (F = false, T = true) F LVARY 13/06/2022 CALPUFF View Version 9.0.0 by Lakes Environmental Software Page 3 of 5
RkJQdWJsaXNoZXIy MjE2NDg3